1. Search for the Perfect Location of the unit

It is important to determine the location where your equipment will be set up. The place should be ideal and friendly for your unit Make sure you know the dimensions before making your decision about the placement.

2. Making the Pads

Make sure that you have already installed the AC pad before making it up. The pad should be the exact size as your AC. After that the return flex must be connected. The return flex should be connected to one in each room. But, the primary return line usually leads up towards the chase and then into the attic. It then descends to the rooms.

3. Unit Installation

There is a need to follow the instructions to install the new device in the event that it has an air duct. This is required for the proper functioning and to protect the manufacturer’s warranty.

4. Connecting the Ducts

After the unit has been set up and the ducts connected You must measure the new shroud. The shroud can be customized.

5. Installation of the Hood

The hood must be secured using the drill. Since it is going to be outside it is essential that the hood be waterproof and weatherproof. Following that, it’s time to begin wiring.

6. Wiring Installation

After everything has been installed, it is now time to start wiring your electrical system. xh2damikic.